RALCO - collimator models with CAN BUS control

R225ACS

Hostly and remotely controlled multi-layer square field automatic model, for installation on stationary units with fixed or rotaring anode x-ray tubes. This collimator features a laser line for Potter Bucky/collimator alignment. Optional motorised filter-changer.

Technical data:

• Mounting plane at 80 mm from the x-ray focus
• Maximum radiation protection 150 kVp – 4 mA
• Six pairs of shutters in 3 layers to accurately define the X-ray field edges
• Motorised shutter movements
• Shutter positionings can be adjusted remotely via CAN BUS or by two knobs on the front panel
• Optional motorised filter-changer
• High luminosity provided by a claster of solid state power LEDs
• Electronic 30-60 sec timer for the activation of the light-field simulating the x-ray field (adjustable via CAN BUS)
• Switch on the front panel to change the system from automatic to manual mode
• LED indicators to show the mode of operation
• Digital display of operation parameters
• Monitoring collimator angulation
• Direct control via CAN BUS
• Self-centerig assembly to the X-ray tube
• Collimator rotation
• External adjustment of mirror angulation
• Minimum inherent filtration: 2 mm aluminium equivalent (1mm on request)
• Field size variable from min: 4 x 4 cm to max: 48 x 48 cm at 100 cm FFD (SID)

R302DACS

Hostly and remotely controlled multi-layer square field automatic model, for installation on stationary units with fixed or rotaring anode x-ray tubes. This collimator features a laser line for Potter Bucky/collimator alignment. Optional manual or motorised filter-changer, optional motorised iris, optional power LED for light field.

Technical data:

• Mounting plane at 80 mm from the x-ray focus
• Maximum radiation protection 150 kVp – 4 mA
• Six pairs of shutters in 3 layers to accurately define the X-ray field edges
• Motorised shutter movements
• Shutter positionings can be adjusted remotely via CAN BUS or by two knobs on the front panel
• Automatic shutter positioning according to cassette size and FFD
• Optional motorised iris (adjustable via CAN BUS)
• Optional motorised filter-changer (adjustable via CAN BUS)
• Optional power LED cluster for light field
• Electronic 30-60 sec timer for the activation of the light-field simulating the x-ray field (adjustable via CAN BUS)
• Switches on the front panel to mode selection
• LED indicators to show the mode of operation
• Digital display of operation parameters
• Monitoring collimator angulation
• Direct control via CAN BUS
• Minimum inherent filtration: 2 mm aluminium equivalent (0.3mm or 1mm on request)
• Field size variable from min: 0 x 0 cm to max: 48 x 48 cm at 100 cm FFD (SID)